Roth AuraModul E

Powerful
With their various output categories and supply temperatures of up to 60 °C, the Roth Aura air/water heat pumps are perfect for use in new buildings and to spruce up single to multi-family houses. The integrated scroll compressor that is used and the CFC-free working circuit means the pumps in the Aura range achieve the best output values. They can be used at outside temperatures down to -20 °C without any problem. On the few extremely cold days, it may also make sense to switch on an auxiliary heat generator at the same time as the air/water heat pump. The immersion heater (9 kW) integrated across the range takes over the auxiliary heating function in monoenergetic operation. An existing heating boiler, for example, can be used for bivalent operation.

Roth AuraModul E

The Roth AuraModul E has an output of 17 kW. With its weather-proof housing, it is also designed for outdoor installation. Installation of the AuraModul E can be carried out at low cost. A simple foundation is adequate as an installation base for the AuraModul E. All supply lines are fed frost-free from below through a cut-out in the ground plate and an opening in the foundation. Despite the very quiet operation of the Roth AuraModul E, the installation location should be selected so that any disturbance in quiet areas can be excluded. The Thermotanks Quadroline, which are specially matched to the Roth heat pumps in function and design, are an ideal add-on for the provision of drinking water. To ensure the necessary defrosting, combination with the buffer storage tank Thermotank Quadroline TQ-T is ideal.

Roth heat pump control module
To conveniently control the Roth AuraModul E, the Roth heat pump control module is intended to be installed on the wall.